How to maintenance the ride on car

The electric ride on car is with many spare parts and functions.This essay is aim to provide some maintenance solutions for most of the customs.

I.If the kids Electric vehicle is out of power, the maintenance solution is as below:

1. First, pls check whether the battery has an output wire and whether it is open for welding.

2. Then pls check the quality of the fuse and fuse holder.

3. Finally, pls check whether the power lock is good or bad.

II. The car does not go when there is electricity, the maintenance way is as below:

1. Check whether the battery output of the electric vehicle is normal. If the output is too low to prove that the battery is bad, the battery should be replaced.

2. Pull out the brake cable. If the rotation of the car proves that the handle is broken, it needs to be replaced or repaired.

3. Check the handlebar. Use an iron wire to short-circuit the handlebar and the signal line. If the car turns, it proves that the handlebar is bad and needs to be replaced or repaired urgently. Turn on the power and turn the handle with a multimeter to measure that the positive and signal lines have positive 5V <1-4>.

4. Whether the controller is good or bad, you can use the positive 5V of the handle wire to short-circuit. If the handle is rotated, it means that the controller is fine. The easiest way is to smell whether the controller smells burnt. If there is, it means that the controller is broken.

5. Check whether the motor is good or not. The carbon brush of the motor is not in contact with each other, which will also cause a bit of non-going.